AirSlax 5.5 Base

Download Now

AirSlax 5.5 Base

AirSlax 5.5 Base | 200 Mb

This program is designed to scan and re-use Wi-Fi networks. Its features: when you run scans all possible channels of the ether, finds and intercepts target, disables the client and by analyzing the data, selects a password, stores the results. Moreover, the utility gives you the ability to hack network with both encryption methods - WEP and WPA. In addition able to find the access point authentication WPS Protocol and to pick up the Pin. This version is actually a Live USB/CD with the operating system on linuksovskim core.
Menu is simple enough:

Additional information

1. Scan the ether
When you select this menu item, scan available Wi-Fi networks and clients connected to them.

2. To choose a goal
Here you can select a target for attack from the list of networks obtained earlier.

3. Intercept the target
Occurs intercept packets going from/to the selected Wi-Fi network. You must wait for the appearance of handshake - in the upper right corner the message "WPA HANDSHAKE". This window should not close when you need to perform the following paragraph.

4. Disconnect the client
Disconnects a client happens to get handshake, as it is transmitted only when connected to Wi-Fi network. Therefore, when the client is disconnected and needs to be launched item 3 menu - intercept the target.

5. Password WPA
After handshake caught, you can proceed to the selection of the password dictionary. A small dictionary is already in the program, and to connect new, you must copy them to the directory slaxdict on the flash drive.

6. Save the result
You can save the results of interception to work with him in the future. The results are stored in the directory slaxchangesdumpresult. File name formed from the name of the Wi-Fi network and has the extension .cab. Note: the CD version of the results of interception and selection (the dump folder) are stored on third-party media ( /dev/sda1, in ShiChuang this is usually drive C: )

7. Password WEP
Hacking WEPшифрования Wi-Fi network. Before the launch of this item you must complete three of the first menu item and keep a running Interception. The hacking takes about 10 minutes.

8. Scan WPS
Scanning Wi-Fi networks with authorization for WPS Protocol.

9. Selection PIN WPS
Selection pin WPS takes a considerable amount of time - from several hours to several days. However, reveal passwords of any complexity.

10. AUTOFIT and interception
This feature scans and hacks Wi-Fi networks automatically, but it is not necessary to abuse her, as she is severely littering the air.

The list of optional modules:

Installation instructions AirSlax
1. Unpack the archive to the stick ( in the root of the stick should see 2 folders - boot and porteus)
2. Go to the boot folder on the flash drive.
3. Run the installer for your operating system. If you create a flash drive from ShiChuang start Porteus-installer-for-ShiChuang.exe if run from Linux
4. type "ok" and press Enter (added protection from accidentally starting the installer, so you can again make sure that you launch the installer on the media)
Run the installer with administrator rights (in Linux as root or with sudo )

ATTENTION!!! Do not run the installer on your hard drive - after this, your computer will most likely fail with it (hard drive) to boot.

Additional information

Total for WPA/WPA2 and WEP
1. Scan
2. The choice of target
3. Interception

1. Scan the air, look who is around, what level of signal encryption and other characteristics.
2. Choose a target to attack. The point with the best signal at the bottom of the list.
3. Run the selected target interception.

Next, the algorithm for hacking networks with WEP and WPA/WPA2 shared:

In terms of hacking, WPA / WPA2 networks are no different.
4. A client disconnecting
5. Password WPA
6. Save the result

4. Disable selected in step 2 client to, when you reconnect gave us a HANDSHAKE (handshake - to perevoda English - handshake. This 4 of a data packet exchanged between the access point and the client for communication. In handshake contains the password in encrypted form.)
5. Choose a password that is intercepted by handshake dictionary. File handshake you can choose from a previously saved. The dictionary can be selected from the list of dictionaries in dict folder.
6. Intercepted handshake can save the selection to it password. When the interception, especially long-term, cap-file accumulates a lot of useless information (simply put - garbage), when you save the file is cleared of all superfluous and saved in the result folder,


7. Password WEP

7. At this point, everything happens automatically. The main objective for selecting WEP Password (If need) to collect as many DATA packets (field #Data in the "Intercept")
First start the box "Authorization" (to make the point took us for "their"). In most cases, authorization is very fast, so the window can be zipped in less than a second. Then run the window "ARP-requests (these requests make a point to send back packets of DATA, which is password protected) and the window password. Attempts at guessing the password are held every 5,000 collected DATA packets.


8. Scan WPS
9. Selection PIN WPS

8. Scan the air for the presence of points supporting the connection by WPS
9. Select the program (old Reaver, Bully newer, in some cases, works better one, some the other) and implement selection PIN. In case of successful selection, the program should issue a password to connect to WiFi network (regardless of the complexity of the password)
P. S. the Vulnerability known for a long time. Many manufacturers point of dostoy released a new firmware with fixes, so the access points with the new firmware this method is not working, or requires too much time for the selection.

10. Auto search and interception.

10. Selectable intercept networks or only with WPA (if your goal is to quickly gather handshake), or all, and WEP encryption and WPA (because the collection of packages and the selection of the password to a WEP network, it can take 10-20 minutes).

88. To change the MAC address.

88. Change MAC address of WiFi cards at random (generated by the program), the selected customer (selected via p. 2), or specified manually.


99. Output

99. As a protection against unintentional closing, the program stops running only p. 99 Exit.

Buy Premium Account To Get Resumable Support & Max Speed

Links are Interchangeable – No Password

Direct Download

Tags: AirSlax

AirSlax 5.5 Base Download via Hotfile Rapidshare Fileserve Megaupload & FileSonic, AirSlax 5.5 Base free torrent downloads included crack, serial, keygen.AirSlax 5.5 Base Fast Download via Rapidshare Hotfile Fileserve Filesonic Megaupload, AirSlax 5.5 Base Torrents and Emule Download or anything related.
Leave a Comment
Your Name:
Add Comments:

Enter Code: